• Stainless Steel tunnel type Dryer/Quartz Sand Microwave Drying machine

Stainless Steel tunnel type Dryer/Quartz Sand Microwave Drying machine

Stainless Steel tunnel type Dryer/Quartz Sand Microwave Drying machine

  • Composite Introduction
  • Recommend Products
  • Related Cases

  Structure of microwave machine:

  1.Transmission System:

  a. Speed of Conveying belt is adjustable.

  In the transmission system, it applies frequency-converting control of speed, worm gear reducer.

  b. The conveyor belt is Teflon Belt,special for microwave.

  c. The deviation of belt is adjusted with Hand-movement.

  2. The body of the Tunnel

  a.The body of the microwave tunnel is made of Stainless Steel. In side there is one set of humidity ext raction system to extract the humidity after heating.

  b. To be safe, there is Automatic Power-off device while open the door of the machine.

  c. The protecting case of Magnetic-

  pipe and transformer is made of stainless steel. On top there is one set of Heat extraction system to extract the heat energy generated by working of machine.

  d.The frame of machine is made of Stainless Steel pipe ,others is made of cold-rolled sheet painted.

  e.One set of infrared thermometric is installed at the outlet of the tunnel to measure the temperature.

  3.The controlling system

  a. On the outside panel there are frequency converting speed controller, emergency stop button, Start, Stop buttons,

  b. All the controlling components will be installed into one controlling box, which is at the entrance of the machine.

  c.Ordinary button control system,.

  d.The microwave power can be adjusted by choosing in the display text.

  e. Every microwave source is an independent unit.If one is broken, the machine will not be prevented from running.

  f. Every magnetron has an overheating protection device